Anthracite Towel Rail Radiator Designer Heated Bathroom Warmer 900mm x 600mm

  
Anthracite Towel Rail Radiator Designer Heated Bathroom Warmer 900mm x 600mm. Brushed Brass Electric Towel Rails. Matt, Textured Anthracite Powder Coated Paint. 90 - 110 (adjustable brackets). Includes Fixing Kit, Wall Brackets, Bleed Valve & Blank Plug. 900mm(w) x 600mm(h) Anthracite Bathroom Heated Towel Rail. The 22mm Horizontal Tubes provide a High BTU Output. This listing is for the towel rail and fixing kit only and can be installed on your central heating, as electric only or as a dual fuel setup when fitted with the correct accessories. A heated towel rail is a functional heating solution for a variety of roomsets and installations. The stunning, matt textured Anthracite Powder Coat paint is a true design statement! We have a wide range of sizes varying in width.

Our towel rails are ideal for both: - drying towels or clothing. Providing an efficient heat source to the room.

All of our anthracite ladder rails are manufactured and packaged to the highest standard. Mm horizontal tubing for improved heat outputs and aesthetics and are more appealing than the standard, smaller 19mm tube often used. The anthracite powder coating is a robust outer finish with impressive heat outputs. Straight Anthracite Ladder Heated Towel Rails.

Projection from Wall: 90mm - 110mm (Adjustable Brackets) Pipe Centres: Width of Towel Rail minus 45mm (BTUS / WATTS Listed below). 300mm(w) x 800mm(h) Straight Anthracite - (895) 300mm(w) x 1200mm(h) Straight.

(1326) 400mm(w) x 800mm(h) Straight. (1107) 400mm(w) x 1200mm(h) Straight. (1637) 400mm(w) x 1600mm(h) Straight. 500mm(w) x 800mm(h) Straight.

(1402) 500mm(w) x 1200mm(h) Straight. (2084) 500mm(w) x 1600mm(h) Straight. 600mm(w) x 800mm(h) Straight. (1624) 600mm(w) x 1200mm(h) Straight. (2330) 600mm(w) x 1600mm(h) Straight.

900mm(w) x 600mm(h) Straight. All of our ladder rails are supplied with. 4 Point fixing copper kit - x1 Bleed Valve - x1 Blank Plug - Our 10 year manufacture guarantee. Our range of heated towel rails can be installed in 3 different ways. On your central heating system. You will need a suitable pair or valves. We recommend using a pair of Angled or Corner Valves When you pipework is coming from the wall or a pair of straight valves when you pipework is coming up from the floor. As a stand alone electric towel rail. You will need: - a suitable electric heating element either standard fixed temperature or manually controlled thermostatic. The towel rail to be pre-filled. As a dual fuel towel rail. You will need: - a suitable dual fuel valve kit (includes valve kit and electric element - pipework coming from the wall). Scottish Highlands and Islands (Postcodes: AB, DD, FK, IV, KW, PA, PH).