Specification: 125mm Projection from the wall, 80mm Pipe Centres, 10 bar Maximum Working Pressure, CE Certified/BS EN 442, 15mm (1/2) Inlets, 15 Years (Radiator) - 1 Year (Element) Guarantee. Supplied with: Towel Rail, Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included.
Radiator Towel Bars & Hooks. 15 Years (Radiator) - 1 Year (Element). Towel Radiator Towel Rail WIFI Electric ONLY Heater Reversible Bathroom FlatTube. 15 Years (Radiator) - 1 Year (Element) Guarantee. BTU's 682 - 1365.Available in Heights of 748mm, 1156mm, 1564mm. Manufactured in accordance with BS EN 442. Brackets, Masonry Fixings, Bleed Valve & Blanking Plug Included. 128mm Projection from the wall. 91mm Wall to Pipe Centres. 10 bar Maximum Working Pressure. Range of manual and thermostatic valves available separately.
Central Heating, Dual Fuel or Electric only - Explained! Central Heating - A central heating Radiator or Towel Rail is heated using your central heating system. The most important part of this system - for your Radiator/Towel Rail - is the boiler, and you most likely have one in your kitchen or bathroom. Electric Only - An Electric Only Radiator or Towel Rail is filled with a heat conducting liquid, this could be oil, or a water based. Working with your home's electricity supply, with the benefit of not needing to be plumbed into your central heating system, a Thermostatic or Non-Thermostatic element is attached to the Radiator or towel rail and this is what controls its heat.
You will need to have these Radiators/Towel Rails installed by a qualified Electrician. Dual Fuel - A Dual Fuel Radiator or Towel Rail is a combination of both the Central Heating and Electric Only versions. A Dual Fuel Radiator/Towel Rail is not filled with any liquid like the Electric Only, because it is made to be plumbed into your Central Heating System, which will be the source of its heat when the Central Heating System is turned on. When the Central Heating System of your house is turned off you can use an Electric Element (Thermostatic or Non-Thermostatic) to heat the Radiator/Towel Rail. Need this item in a different fuel type?Shop Our Full Valve Range. Please allow extra time if you are paying by cheque. Or you can collect from us.
This means that you do not have to wait in until your goods arrive. We therefore respectfully ask that you do not arrange for a plumber or other tradesperson to fit your goods until you have received and checked your order. We cannot be held responsible for wasted tradesperson visits and charges incurred as a result. SPECIAL ARRANGEMENTS FOR COURIER DELIVERIES. When your order arrives, you will be asked to sign to say that you have received the goods and that they are in good condition.
Please check both the external packaging and the product inside for any damage. We will arrange for a replacement item to be delivered to you as soon as possible, at which time the damaged item will be collected and taken away by the driver. SPECIAL ARRANGEMENTS FOR PALLET DELIVERIES. The drivers are only insured to deliver goods to the curb and are not required to carry goods into your home.If you find any damage, please sign the pallet as'DAMAGED' and the driver will take the damaged pallet away. If you are having multiple items delivered and only some are damaged, please sign'DAMAGED' for the goods that are damaged.
If someone else will be signing for your goods. If someone else is signing for the goods on your behalf, you agree to ensure that your nominated signatory checks the goods prior to acceptance.Choosing the right accessories for your new Radiator or Towel Rail. The type of valves that you need will depend on the configuration of your pipework. If the towel rail / radiator has connections at the bottom. You will need either angled or straight valves. Angled if your pipes are coming from the wall as this will provide a 90 degree angle up into the bottom of the towel rail / radiator, straight if your pipes are coming from the floor and just need to go straight up into the bottom of the towel rail / radiator. If the towel rail / radiator has connections at the sides. You will need either angled or corner valves, angled if your pipes are coming from the floor as this will provide a 90 degree angle into the side of the radiator. Corner Valves if your pipes are coming from the wall this will also give a 90 degree angle into the side of the radiator however is the neatest solution with this type of configuration.